Drag coefficient of circular models and squares installed in ECITEC wind tunnel
The coefficient of drag was determined with the prototype built in the ECITEC fluid laboratory, which consists of a scale and a steel support to which are fixed the square and circular models that are installed in the subsonic wind tunnel of ECITEC. With the data obtained, values for the drag coeffi...
| Autores: | ; ; ; ; |
|---|---|
| Tipo de documento: | Artigo |
| Estado: | Published version |
| Data de publicação: | 2018 |
| País: | México |
| Recursos: | UABC |
| Repositório: | Revista de Ciencias Tecnológicas |
| Idioma: | Espanhol |
| OAI Identifier: | oai:ojs.recit.uabc.mx:article/49 |
| Acesso em linha: | https://recit.uabc.mx/index.php/revista/article/view/49 |
| Nível de acesso: | Acesso aberto |
| Palavra-chave: | Wind Tunnel Drag Coefficient Turbulent Flow Speed Profile Pitot Probe. Túnel de Viento Coeficiente de Arrastre Flujo Turbulento Perfil de Velocidad Tubo Pitot. |
| Resumo: | The coefficient of drag was determined with the prototype built in the ECITEC fluid laboratory, which consists of a scale and a steel support to which are fixed the square and circular models that are installed in the subsonic wind tunnel of ECITEC. With the data obtained, values for the drag coefficient of 1.3 to 1.6 were obtained for the models analyzed with a Reynolds with a range of 106367 to 221954. |
|---|