Computational characterization of polymeric materials 3D-printed via fused filament fabrication
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Mechanics of Advanced Materials and Structures on 2022, available online at: http://www.tandfonline.com/10.1080/15376494.2022.2032496.
| Autores: | ; ; ; |
|---|---|
| Tipo de documento: | Artículo |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Lenguaje: | Inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/385459 |
| Acceso en línea: | https://hdl.handle.net/2117/385459 https://dx.doi.org/10.1080/15376494.2022.2032496 |
| Nivel de acceso: | Acceso abierto |
| Palabra clave: | Three-dimensional printing Additive manufacturing Material characterization Mechanical properties Computational homogenization Anisotropy Impressió 3D Àrees temàtiques de la UPC::Enginyeria dels materials |
| _version_ | 1878736408480317440 |
|---|---|
| author | Dialamishabankareh, Narges|||0000-0003-3115-7249 |
| author2 | Rivet Fernández, Iván|||0000-0002-8710-2733 Cervera Ruiz, Miguel|||0000-0003-3437-6703 Chiumenti, Michele|||0000-0002-6286-7393 |
| author2_role | author author author |
| author_browse | Cervera Ruiz, Miguel|||0000-0003-3437-6703 Chiumenti, Michele|||0000-0002-6286-7393 Dialamishabankareh, Narges|||0000-0003-3115-7249 Rivet Fernández, Iván|||0000-0002-8710-2733 |
| author_facet | Dialamishabankareh, Narges|||0000-0003-3115-7249 Rivet Fernández, Iván|||0000-0002-8710-2733 Cervera Ruiz, Miguel|||0000-0003-3437-6703 Chiumenti, Michele|||0000-0002-6286-7393 |
| author_role | author |
| collection | UPCommons. Portal del coneixement obert de la UPC |
| description | This is an Accepted Manuscript of an article published by Taylor & Francis Group in Mechanics of Advanced Materials and Structures on 2022, available online at: http://www.tandfonline.com/10.1080/15376494.2022.2032496. |
| eu_rights_str_mv | openAccess |
| format | article |
| id | ES_8e7961ce914c2ffa6c867467e2b9ad3b |
| institution | Universitat Politècnica de Catalunya (UPC) |
| instname_str | Universitat Politècnica de Catalunya (UPC) |
| language | eng |
| network_acronym_str | ES |
| network_name_str | España |
| oai_identifier_str | oai:upcommons.upc.edu:2117/385459 |
| publishDate | 2023 |
| publishDateSort | 2023 |
| publisher | Taylor & Francis Group |
| publisherStr | Taylor & Francis Group |
| reponame_str | UPCommons. Portal del coneixement obert de la UPC |
| spelling | Computational characterization of polymeric materials 3D-printed via fused filament fabrication Dialamishabankareh, Narges|||0000-0003-3115-7249 Rivet Fernández, Iván|||0000-0002-8710-2733 Cervera Ruiz, Miguel|||0000-0003-3437-6703 Chiumenti, Michele|||0000-0002-6286-7393 Three-dimensional printing Additive manufacturing Material characterization Mechanical properties Computational homogenization Anisotropy Impressió 3D Àrees temàtiques de la UPC::Enginyeria dels materials This is an Accepted Manuscript of an article published by Taylor & Francis Group in Mechanics of Advanced Materials and Structures on 2022, available online at: http://www.tandfonline.com/10.1080/15376494.2022.2032496. This work develops a novel homogenization-based computational strategy for predicting the mechanical properties of fused filament fabricated parts by characterizing the component according to the different printing patterns used. The anisotropic constitutive material models obtained for each printing pattern allows the accurate prediction of the behavior of the entire component. The model is validated against experiments with the samples manufactured according to corresponding printing patterns. Various materials including Polycarbonate/Acrylonitrile Butadiene Styrene and ULTEM 9085 are tested. The good accuracy of the predictions obtained using present approach indicates that material characterization can be successfully performed in a fully numerical way. This work has been supported by the European Union’s Horizon 2020 Research and Innovation Programme (H2020-DT-2019-1 No. 872570) under the KYKLOS 4.0 Project (An Advanced Circular and Agile Manufacturing Ecosystem base<d on rapid reconfigurable manufacturing process and individualized consumer preferences) and by the Ministry of Science, Innovation and Universities (MCIU) via: the PriMuS project (Printing pattern based and MultiScale enhanced performance analysis of advanced Additive Manufacturing components, ref. num. PID2020-115575RB-I00). The financial support from the Spanish Ministry of Economy and Competitiveness, through the Severo Ochoa Programme for Centers of Excellence in R&D (CEX2018-000797-S), is gratefully acknowledged as well as from CONCYTEC R + D (Project Reference: 163-2017-FONDECYT, in association with Pontifical Catholic University of Perú and CIMNE) -” Optimización del uso de polímeros sintéticos en procesos de manufactura aditiva mediante modelos de simulación computacional y técnicas de caracterización de materiales. Caso de estudio: aplicaciones médicas - prótesis de mano.” Peer Reviewed Taylor & Francis Group https://hdl.handle.net/2117/385459 https://dx.doi.org/10.1080/15376494.2022.2032496 |
| spellingShingle | Computational characterization of polymeric materials 3D-printed via fused filament fabrication Dialamishabankareh, Narges|||0000-0003-3115-7249 Three-dimensional printing Additive manufacturing Material characterization Mechanical properties Computational homogenization Anisotropy Impressió 3D Àrees temàtiques de la UPC::Enginyeria dels materials |
| title | Computational characterization of polymeric materials 3D-printed via fused filament fabrication |
| title_full | Computational characterization of polymeric materials 3D-printed via fused filament fabrication |
| title_fullStr | Computational characterization of polymeric materials 3D-printed via fused filament fabrication |
| title_full_unstemmed | Computational characterization of polymeric materials 3D-printed via fused filament fabrication |
| title_short | Computational characterization of polymeric materials 3D-printed via fused filament fabrication |
| title_sort | Computational characterization of polymeric materials 3D-printed via fused filament fabrication |
| topic | Three-dimensional printing Additive manufacturing Material characterization Mechanical properties Computational homogenization Anisotropy Impressió 3D Àrees temàtiques de la UPC::Enginyeria dels materials |
| topic_facet | Three-dimensional printing Additive manufacturing Material characterization Mechanical properties Computational homogenization Anisotropy Impressió 3D Àrees temàtiques de la UPC::Enginyeria dels materials |
| url | https://hdl.handle.net/2117/385459 https://dx.doi.org/10.1080/15376494.2022.2032496 |