High temperature proton exchange membrane fuel cells control for combined heat and power applications
Over the last few years, the research of new energy sources as a substitute for the current de-pletable ones has been increasing. One of these possible sources is hydrogen, one of the mostcommon elements in the planet. By using what’s called as a fuel cell, it can be used to efficientlygenerate clea...
| Autor: | |
|---|---|
| Tipo de documento: | Dissertação de mestrado |
| Data de publicação: | 2019 |
| País: | España |
| Recursos: | Universitat Politècnica de Catalunya (UPC) |
| Repositório: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | Inglês |
| OAI Identifier: | oai:upcommons.upc.edu:2117/172323 |
| Acesso em linha: | https://hdl.handle.net/2117/172323 |
| Nível de acesso: | Acesso aberto |
| Palavra-chave: | PEM fuel cells Automatic control Piles de combustible de membrana d'intercanvi de protons Control automàtic Àrees temàtiques de la UPC::Informàtica::Automàtica i control |
| Resumo: | Over the last few years, the research of new energy sources as a substitute for the current de-pletable ones has been increasing. One of these possible sources is hydrogen, one of the mostcommon elements in the planet. By using what’s called as a fuel cell, it can be used to efficientlygenerate clean electrical and thermal energy, as the only output is water.This project has been developed in the framework of the DPI2015-69286-C3-2-R MICAPEM (Pa-rameter estimation, diagnosis and control for the improvement of efficiency and durability ofPEM fuel cells) project, which aims to create an architecture and control of a system that will beable to supply electrical and thermal power to a typically-sized house using a Proton ExchangeMembrane Fuel Cell working at high-temperature (HT-PEMFC).To do so, a Model Predictive Control (MPC) will be used, capable of controlling the amountof hydrogen being consumed based on the prediction of the house’s electrical and thermal de-mand.The numerical computation system Matlab will be used for the creation of the MPC and itsSimulink tool, to model the PEMFC system. Then a series of simulations will be run, which willboth test the controller in several scenarios as well as to understand its behaviour |
|---|