Hybrid Films from Blends of Castor Oil and Polycaprolactone Waterborne Polyurethanes
Waterborne polyurethanes (WBPUs) with relatively high biobased content (up to 43.7%) were synthesized, aiming at their use as coatings for metals and woods. The study was performed on self-standing films obtained from anionic polyurethane water dispersions (PUDs). The initially targeted PUD was prep...
| Authors: | ; ; |
|---|---|
| Format: | Article |
| Status: | Published version |
| Publication date: | 2022 |
| Country: | Argentina |
| Institution: | Consejo Nacional de Investigaciones Científicas y Técnicas |
| Repository: | CONICET Digital (CONICET) |
| Language: | English |
| OAI Identifier: | oai:ri.conicet.gov.ar:11336/212029 |
| Online Access: | http://hdl.handle.net/11336/212029 |
| Access Level: | Open access |
| Keyword: | CASTOR OIL CONTACT ANGLE DIMETHYLOLPROPIONIC ACID HYBRID FILMS SWELLING TARTARIC ACID WATERBORNE POLYURETHANE https://purl.org/becyt/ford/2.5 https://purl.org/becyt/ford/2 |
| Summary: | Waterborne polyurethanes (WBPUs) with relatively high biobased content (up to 43.7%) were synthesized, aiming at their use as coatings for metals and woods. The study was performed on self-standing films obtained from anionic polyurethane water dispersions (PUDs). The initially targeted PUD was prepared from castor oil (CO), while tartaric acid (TA), a byproduct of wine production, was utilized as the internal anionic emulsifier. Although the films were cohesive and transparent, they were fragile, and thus blending the CO-TA PUD with other WBPUs was the chosen strategy to obtain films with improved handling characteristics. Two different WBPUs based on polycaprolactone diol (PCL), a biodegradable macrodiol, were prepared with dimethylolpropionic acid (DMPA) and tartaric acid (TA) as synthetic and biobased internal emulsifiers, respectively. The use of blends with PCL-TA and PCL-DMPA allowed for tailoring the moduli of the samples and also varying their transparency and haze. The characterization of the neat and hybrid films was performed by colorimetry, FTIR-ATR, XRD, DMA, TGA, solubility and swelling in toluene, and water contact angle. In general, the addition of PCL-based films increases haze; reduces the storage modulus, G’, which at room temperature can vary in the range of 100 to 350 MPa; and reduces thermal degradation at high temperatures. The results are related to the high gel content of the CO-TA film (93.5 wt.%), which contributes to the cohesion of the blend films and to the crystallization of the PCL segments in the samples. The highest crystallinity values corresponded to the neat PCL-based films (32.3% and 26.9%, for PCL-DMPA and PCL-TA, respectively). The strategy of mixing dispersions is simpler than preparing a new synthesis for each new requirement and opens possibilities for new alternatives in the future. |
|---|